Équipment and capacity

Click to enlarge
 

Click to enlarge

  • The plant has power available from 300KVA to 600V starting from the network trials for low power.

  • The power plant with 1150KVA to 600V,permanently installed, makes sure the necessary power is there for power trials.

  • A  30MVAR, three- phase modular load bank assures the balance for a heat run.

  • A set of  Step-Up transformers from 600V to 130KV’s supplies transformers when doing trials.

  • Induced voltage / High frequency : 

                         - Source 75KVA, 420Hz
                         - Source 250KVA, 120Hz

  • Partial discharge test.

  • Applied voltage up to 300KV.

  • No load loss and excitation current.

  • Load loss and impedance.

  • Power factor at 10KVAC.

  • Capaciousness and dissipation.

  • Transformation report and angular dephasing. 

  • Winding resistance.

  • Isolation level for winding  and coring.

  • Dielectric verification of isolating liquid according to ASTMD877 and D-1816.

Click to enlarge

 
Top of page

Top of page